■ Using the SU-2 Image Viewer for the first time
1. Press the release buttons on both
sides of the SU-2 Image Viewer to
lift the cover up.
Check that the NTSC/PAL switch
is in the correct position and that
it corresponds to the TV standard
used in your country.
2. Connect the SU-2 Image Viewer
to the RCA connector on your TV.
If your TV does not have a RCA
connector, you need a RCA/SCART adapter, which you can obtain from a
hardware shop.
3. Switch on the SU-2 Image Viewer. The Nokia logo appears on your TV screen.
4. Make sure that your phone is switched on. Then, enter your phone’s Bluetooth
menu and activate the Bluetooth connection.
5. Enter the submenu where you can set the phone to search for Bluetooth
devices, and start the search. The phone searches for all Bluetooth devices
within about 10 meters and shows them in a list.
6. Select SU-2 from the list.
Copyright
©
2003 Nokia. All rights reserved.
10
7. Key in the four digit verification code ("pair") to your phone. The code is shown
on your TV screen in the top right corner.
Once you have keyed in the verification code, your phone sends it to the SU-2
Image Viewer. See
Using the SU-2 Image Viewer with several paired phones
on
page
13
.
The blue indicator light shows that the Bluetooth connection is active. The SU-
2 Image Viewer appears in the phone menu where you can view the Bluetooth
devices that are currently paired with your phone.
8. Start using the SU-2 Image Viewer.
U
si
n
g the SU
-2
I
m
age Vi
ewer
11
Copyright
©
2003 Nokia. All rights reserved.